We did this Gelli-Scene project at a workshop in Harrogate recently.
All you need is the 6"x6" Gelli Plate
Make- up sponges
Stamp the toadstool on a piece of the card
Lay the gelli down on top of it
Screw up a sheet of copy paper at the ready and punch out a Post-it moon.
Brayer a layer of Buff Titanium acrylic paint over the Gelli plate
Using the crumple paper, lift the paint and distress the layer,
especially where you can see the toadstools
Add the Post-it moon. Be quick!
Lay down a fresh piece of card. Line it up with the one underneath.
Rub the back and pull your first layer.
Write T for top on the back of your piece.
Add a pea amount of Brown Umber acrylic paint to the Gelli plate.
Spread it evenly, quickly and gently with your brayer.
Lay the Treescape Stencil on top.
Using a sheet of copy paper blot the brown paint quite thoroughly.
Using the crumpled paper, clear the trees which cover the toadstools.
Lay down your first print, rub the back
Pull the second layer.
Use a Sepia ink pad to stamp the toadstools into the opening on your artwork.
Place the stencil over the piece
Sponge Pesto dye-based ink into the grassy area. Try to stay within the printed picture.
Lift the stencil and carefully sponge into the area around the toadstools.
Remember: you can always add it, but you can't take it away! So go easy!
I used the colour from the Terra Cotta ink pad to colour in the toadstools.
Just press the lid down into the ink pad and then add a little water
with a paintbrush. The Pesto and Slate work well for the stalks.
Let the paint layers to dry before adding a second or third layer for shade and depth.
Replace the stencil and gently apply the misty sky by sponging with Slate Adirondack.
Drag the sponge towards the toadstools, but don't be afraid to leave a little clearing.
There. Trim the piece as necessary and mount. I really like the printed edge, so I don't trim that.
Hope you enjoy this little Autumnal creation!
Working with a Gelli Plate is such a pleasure. But be warned!
It is highly addictive!